Water treatment that makes sense from start to finish
Better water comes from treating the right problem—in the right order.
PWS combines water assessment, sediment filtration, activated carbon and UV-C where appropriate. Each stage has a clear purpose: protect the system, improve everyday water and deliver it at a flow your property can live with.
- Problem-ledOnly the stages your water needs
- Flow-awareSized around real property demand
- Service-readyMaintenance considered from day one
- 01Sediment
- 02Carbon
- 03UV-C
Start with the water, not the catalogue
The same filter is not right for every Phuket property
Water quality can change with the source, storage tank, plumbing, season and daily demand. A useful design begins by understanding those conditions and the result you want—not by adding the most equipment.
Source and water condition
Municipal, trucked, well and stored water can create different sediment, taste, odor and hygiene priorities.
Tanks and plumbing
Storage and pipework can change the water after it reaches the property, so the full route matters.
People and peak demand
A condo kitchen, family villa and hotel require different capacity, pressure and service access.
The outcome you want
Clearer water, better taste, greater hygiene confidence or whole-property flow each point to a different design.
A connected treatment journey
Each stage prepares the water for what comes next
A multi-stage system works as a sequence. Removing particles first helps protect later media and, when UV-C is appropriate, helps the disinfection stage operate under the conditions it was selected for.
- 01
Assess
Understand the source, storage, flow and concern.
- 02
Remove particles
Capture sand, rust and suspended material first.
- 03
Improve taste and odor
Use carbon or selected media for the identified issue.
- 04
Add UV-C when needed
Apply a hygiene barrier when the source and assessment support it.
- 05
Deliver useful flow
Size housings, pumps and controls for everyday demand.
Important: not every property needs every stage. PWS selects the sequence around the actual water and intended use.
Technology translated into daily life
What each treatment stage is there to change
No jargon-filled shopping list. Each stage should solve a defined problem and contribute to a result you can notice, maintain and rely on.
Sediment filtration
Captures visible and suspended particles before they reach finer treatment stages, fixtures and appliances.
- Helps with
- Cloudiness, sand, rust and premature clogging
- Does not solve alone
- Dissolved contaminants or microbiological risk
Activated carbon
Uses adsorption to reduce chlorine-related taste and odor plus selected organic compounds.
- Helps with
- Taste, odor and selected chemistry concerns
- Depends on
- Correct media choice, contact time and replacement
UV-C disinfection
Exposes prepared water to ultraviolet light without routinely dosing treatment chemicals into the water.
- Helps with
- Microbiological risk when correctly selected and maintained
- Depends on
- Water clarity, flow, lamp condition and correct sizing
Flow, pressure and controls
Connect the treatment stages to the way showers, kitchens, laundry and guest areas are used together.
- Helps with
- Comfort at peak demand and stable system operation
- Depends on
- Property layout, pressure, pipework and actual usage
Why local context matters
A good design works with the property around it
Performance is not only about the filter media. Space, ventilation, drainage, access, existing tanks, pipe sizes and peak water use all affect how the system should be installed.
- Homes and condos: balance compact placement with practical servicing.
- Villas and rentals: protect guest comfort across several bathrooms.
- Hotels and businesses: plan capacity, access and maintenance around operations.
Designed to keep working
Good technology should be straightforward to service—not forgotten in a corner
Filters load with particles, carbon capacity changes with use and UV-C lamps need monitoring and replacement. PWS plans access and service responsibility as part of the original design.
- Components positioned for inspection and replacement
- Maintenance intervals based on the water source and actual demand
- Clear explanation of what each stage does and when it needs attention
You do not need to diagnose the water yourself
Tell us what you want to improve. We will help work out the treatment path.
Share the property type, water source and biggest concern. PWS will explain which stages may be useful, which are not, and what should happen next.